Sensors, Probes, Transducers
Here you will find the most important temperature sensors, humidity and pressure transducers. If you cannot find the matching product, please contact us. These products can also be found in our catalogue, chapter 7
             
  Type Design. Cable/Supp. Housing Brief Description Measuring Range Add. Info

TF 201 3m, 6m, 12m, 15m Sheath 6mm,
nickel plated
Standard Temperature Sensor -30,0...+80,0°C Table

TF 231 3m, 6m, 12m, 15m, shielded Sheath 6mm,
nickel plated
Standard Temperature Sensor -30,0...+80,0°C Table

TF 403 3M 3m Sheath 6mm, stainless steel Temperature Sensor (Pt100, Class B, 3-wire) -40...+90°C Table

TF 501 3m, 6m, 9m, shielded Sheath 6mm, stainless steel 1.4301 (V2A) Temperature Sensor (Pt1000, Class B) -50...+105°C Table

TF 521 1m, Teflon Sheath 6mm,
stainless steel 1.4571 (V4A)
Temperature Sensor (Pt1000, Class B) -85...+250°C Table

TF 531 3m, Silicone Sheath 6mm,
stainless steel 1.4571 (V4A)
Temperature Sensor (Pt1000, Class B) -50...+200°C Table

Immersion Sleeve
6,2mm
  Stainless steel 1.4571 For TF standard sensors in fluids    

TFG 201   Wall mounting Temperature sensor for dry rooms like offices, appartments, etc.. -40,0...+50,0°C Table

TFG 501   Wall mounting Temperature sensor (Pt1000) for dry rooms like offices, appartments, etc.. -40,0...+50,0°C Table

TFK 201   Flange mounting Temperature Sensor for Ventilation Ducts. -40,0...+100,0°C Table

TFK 501   Flange mounting Temperature Sensor (Pt1000) for Ventilation Ducts -50,0...+200,0°C Table

TFN 201   Plastic, wall mounting Temperature sensor for wet rooms, water protected. -40,0...+50°C Table

TFN 501   Plastic, wall mounting Temperature sensor (Pt1000) for wet rooms, water protected. -40,0...+50°C Table

TFT 201   Metal, mounting by Dip-Fitting Temperature sensor for fluids. It is mounted in a Dip-Fitting and has no contact with the fluid. -40...+100°C Table

TFT 501   Metal, mounting by Dip-Fitting Temperature sensor (Pt1000) for fluids. It is mounted in a Dip-Fitting and has no contact with the fluid. -50...+200°C Table

Dip Fitting TFT   Stainless steel 1.4571 Mounted in a pipe    

DG -1/9
2-10V

14..30V DC brass Pressure transducer for refrigerants, output 2-10VDC -1...9 bar relative Data sheet

DG -1/45
2-10V

14..30V DC brass Pressure transducer for refrigerants or CO2, output 2-10VDC -1...45 bar relative Data sheet

DG -1/9
4-20mA
7..30V DC brass Pressure transducer for refrigerants,
output 4-20mA, 2-wire system
-1...9 bar relative Data sheet

DG 0/30
4-20mA
7..30V DC brass Pressure transducer for refrigerants,
output 4-20mA, 2-wire system
0 bis 30 bar relative Data sheet

DGA -1/9
4-20mA
7..30V DC CrNi-steel Pressure transducer for ammoniac/NH3,
output 4-20mA, 2-wire system
-1...9 bar relative Data sheet

DGA 0/30
4-20mA
7..30V DC CrNi-steel Pressure transducer for ammoniac/NH3,
output 4-20mA, 2-wire system
0 bis 30 bar relative Data sheet

DG 0/10 GSW

Out of stock

10..30V DC CrNi-steel, IP 67 Pressure transducer for refrigerants,
output 4-20mA, 2-wire system
0...10 bar, absolute (= -1...9 bar relative) Data sheet

DG 0/25 GSW

Out of stock

10..30V DC CrNi-steel, IP 67 Pressure transducer for refrigerants,
output 4-20mA, 2-wire system
0...25 bar, relative Data sheet

DG -1/9 HUB

Out of stock

16,2..33V DC Ceramic / Inox 1.4305 Pressure transducer for refrigerants, output 2-10VDC -1...9 bar, relative Data sheet

FF 2520 15..32V DC, 12..20V AC 98x64x38mm, wall mounting Capacitive Sensor for Measuring
Relative Air Humidity.
Outputs:
1x 0...10V,
1x 4...20mA
Data sheet

FF 2505 8..12V DC 98x64x38mm, wall mounting Capacitive Sensor for Measuring
Relative Air Humidity.
Outputs:
1x 0...10V,
1x 4...20mA
Data sheet

L56-2001   For cold coil fixing Electrodes for liquid level or ice accretion controllers which measure liquid conductivity, e.g. FN or EE 37xx series controllers.    

L56-3001   For cold coil fixing Electrodes for liquid level or ice accretion controllers which measure liquid conductivity, e.g. FN or EE 37xx series controllers.